Oceanic versa Pro, Руководство по эксплуатации

Страница: 82 / 96

82
Inspection
• Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
• Inspect the Buttons, Lens, and Housing to ensure they are
not cracked or damaged.
• If it is necessary to clean the Battery Compartment, flush
the it and all components with a solution of 50% white
vinegar and 50% fresh water. Rinse with fresh water, and
allow to dry overnight, or blow dry with a hair dryer (set at
'no heat').
WARNING: If damage, moisture, or corrosion is
found, it is recommended that you return your
Versa Pro to an Authorized Oceanic Dealer, and DO
NOT attempt to use it until it has received factory
prescribed service.
Battery Installation
• Slide a new 3 volt type CR2450 Lithium Battery, negative (-
) side down into the Battery Cavity. Slide it in from the
right side and ensure that it slides under the contact clip on
the left rim of the cavity.
• Orient the Retaining Bar across the lower portion of the
Battery and carefully push it down into position (Fig. 93).
Fig. 93 - Battery Installation