Oceanic versa Pro Скачать руководство пользователя страница 27

Страница: 27 / 96

ENTERING SETTINGS -SET MODE #2

These settings are ones that are not likely to change. To save
time at the dive site, verify the set points and adjust them as
desired prior to departing on the day's dive trip.

TO SET - UNITS OF MEASURE

(while in the Surface Mode)

Factory set for Imperial, Units of Measure can also be set for
Metric.

• Press Both buttons simultaneously, release when SET: 2

appears.

• Press and release the Advance (Front) button, the Units

screen appears with the graphic FT (or M), and Tempera-
ture icon and letter F (or C) flashing (Fig. 24).

• Press the Select (Side) button to toggle between Imperial (F

and Feet) and Metric (M and C) units.

• Press the Advance (Front) button to accept the setting and

advance to Set Hour Format, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.

Fig. 24- Set Units of Measure

To return to Sur-
face Mode at any
time while in Set
Mode, press and
hold Both buttons
for 2 seconds.

Содержание versa Pro

































































































Результаты поиска

Содержание versa Pro

Отзывы:

Похожие инструкции для versa Pro

Бренды по названию

Популярные бренды

Oceanic versa Pro, Руководство по эксплуатации

Результаты поиска

Содержание versa Pro

Отзывы:

Похожие инструкции для versa Pro

Бренды по названию

Популярные бренды