Oceanic versa Pro, Руководство по эксплуатации

Страница: 78 / 96

78
CARE AND CLEANING
Protect your Versa Pro from shock, excessive temperatures,
chemical attack, and tampering. Protect the lens against
scratches with a transparent Instrument Lens Protector. Small
scratches will naturally disappear underwater.
• Soak and rinse the Versa Pro in fresh water at the end of
each day of diving, and check to ensure that the areas
around the low pressure (depth) sensor (Fig. 89a), down-
load interface port, and buttons are free of debris or
obstructions.
• To dissolve salt crystals, use lukewarm water or a slightly
acidic white vinegar/water bath. After removal from the
bath, place the unit under gently running water and towel
dry before storing.
• Transport your unit cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Versa Pro should be inspected annually by an
Authorized Oceanic Dealer who will perform a factory pre-
scribed function check and inspection for damage or wear.
To keep the 2 year limited warranty in effect, this inspection
must be completed one year after purchase (+/- 30 days).
Oceanic recommends that you continue to have this inspection
performed every year to ensure it is working properly. The
costs of annual inspections are not covered under the terms of
the 2 year limited warranty.
Fig. 89 - Depth Sensor