14
Important note.
Make sure the recut frame work is a good fit between cross braces. As the panel carries the load of
the roof. If you are reducing both length and width of the cabin, ensure the modified ends of panels
are never adjacent to each other.
To reduce the height of cabin. First check heater clearances then proceed as for side and roof panels.
If you are in any doubt regarding clearances please ring our Technical Department.
(P15)
(P16)
(P17)
(P18)
Benches.
Reduce side slats by same amount as wall panels, remove any part of the fillet blocks that impede the
fixing of the notched cross rails and refix vertical blocks for end rail fixing – screw and glue ALL
joints.
