Dedicated technical helpline: 01226 397987
© 2022 Waterguard Services Limited, All Rights Reserved
Waterguard Solo Installation Guide
IMPORTANT!
CURRENT IEE REGULATIONS: THE SERIES 7 SHOULD BE INSTALLED BY A QUALIFIED
ELECTRICIAN, IN ACCORDANCE WITH THE RECOMMENDATIONS LAID DOWN BY THE HVCA AND SOUND
ENGINEERING PRACTICE. A COMPETENT PLUMBER MUST CARRY OUT THE ASSEMBLY AND INSTALLATION
OF ANY WATER METERS AND VALVES. ANY DAMAGES INCURRED DUE TO IMPROPER INSTALLATION ARE
NOT COVERED UNDER WARRANTY.
IMPORTANT
: PLEASE READ THIS GUIDE CAREFULLY AND IN FULL BEFORE INSTALLING.
KEEP CLEAN
: DO NOT LET DEBRIS ENTER THE WATER METER(S) OR VALVE(S).
STORAGE:
KEEP IN A DRY PLACE PRIOR TO INSTALLATION TO AVOID POSSIBLE DAMAGE TO INTERNAL
COMPONENTS.
ATTENTION
: IT IS IMPORTANT TO STRICTLY FOLLOW THESE
INSTRUCTIONS IN FULL. THE 3V LITHIUM BATTERY MUST ONLY BE
CONNECTED AFTER MAINS POWER. FAILURE TO DO THIS WILL RESULT IN
SYSTEM FAILURE.
NEW BUILD INSTALLATION
: DO NOT INSTALL VALVE ASSEMBLY PRIOR TO
FLUSHING THE SYSTEM AS THIS WILL CAUSE DEBRIS TO BECOME LODGED
IN THE FLOW SENOR AND WILL REQUIRE REPLACEMENT.
