![background image](http://html1.mh-extra.com/html/reece/posh-domaine-semi-recessed-wall-hung/posh-domaine-semi-recessed-wall-hung_installation-instructions-manual_1430885001.webp)
page 12 of 19
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
Domaine Semi-Recessed Wall Hung
PRIOR TO INSTALLATION CHECKLIST
This product must be installed by a qualified tradesperson and we would expect the installation to
be undertaken in a tradesperson like manner and finished to a tradesperson standard. This product
carries a full warranty against faulty workmanship and materials.
Please inspect thoroughly before installation to ensure that the product has not been damaged
and is correct. No claims for damage or incorrect items will be recognised after installation.
Check Products For Any Damages
Positioning & Ventilation
Check for Support Beams
Within 48 hours of receiving your goods, unpack your ADP
product and check for any possible freight damages or incorrect
items.
Please contact your place of purchase to report damages or
missing parts.
No claims for damages will be recognised after installation.
Please note: fixing screws/bolts are not supplied for installation.
Planning your bathroom furniture placement is critical.
Furniture must be at least 300mm away from any
wet areas. Materials used in the construction of our
furntiture units are moisture resistant, not water proof.
Do not expose furniture to shower spray.
It is important that your bathroom is adequatley
ventilated to eliminate moisture build up.
High humidity will lead to permanent dampness and
mould resulting in a deterioration of the materials in
your bathroom.
Wall hung furniture & basins require fixing to a support
beam fitted between the studs to give a solid wall backing
to attach the vanity to.
If necessary, fix additional support noggins at desired
height for cabinet and basin fixing prior to sheeting the wall.
Ensure total width of support noggin exceeds vanity width.
1
2
3
Ventilation is
important to
prevent mould
& moisture
build up
300mm
(minimum clearance)
BATH
IT IS THE RESPONSIBILITY OF THE INSTALLER TO MAKE ANY ADJUSTMENTS
TO DOORS/DRAWERS AFTER INSTALLATION IF REQUIRED.
page 1 of 8