![background image](http://html1.mh-extra.com/html/sloan/eaf-700/eaf-700_installation-instructions-and-user-manual_1293634001.webp)
INSTALLATION INSTRUCTIONS AND USER MANUAL FOR
SLOAN
®
EAF GOOSENECK SERIES FAUCETS
Code No: 0816409
Rev. 1 (07/11)
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants its product, manufactured and sold for commercial for industrial uses, to be free from defects in material and
workmanship for a period of three (3) years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from date of first purchase.
During this period, Sloan Valve Compnay will, at its option repair replace, or refund the purchase price of any product which fails to conform with this warranty under
normal use and service. This shall be the sole and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No
claims will be allowed for labor, transportation or other costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products
directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH ExTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEqUENTIAL DAMAGES
OF ANY MEASURE WHATSOEVER.
PRIOR TO INSTALLATION
Prior to installing the Sloan Optima EAF-700 Series Faucets,
install the items listed below. Also, refer to rough-in illustrations.
• Lavatory/sink
• Drain Line
• Hot/Cold Water Supply Lines or Tempered Supply
IMPORTANT:
• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH
APPLICABLE CODES AND REGULATIONS.
• FLUSH ALL WATER LINES PRIOR TO MAKING CONNECTIONS.
• KEEP THREAD SEALANT OUT OF YOUR WATERWAY TO PREVENT
COMPONENT PART DAMAGE! DO NOT USE ANY SEALANT ON
COMPRESSION FITTINGS.
Trim Plates
When the EAF Faucet is installed on a sink that has three (3) hole
punchings, a trim plate should be used. Trim Plates must be specified and
ordered separately.
SFP-11 Trim Plate for 4” (102 mm) Centerset Sink
SFP-22 Trim Plate for 8” (203 mm) Centerset Sink
TOOLS REQUIRED FOR INSTALLATION
• 13 mm open end wrench or nut driver for faucet retainer nut
• 5/8” open end wrench for female end of flex hose
EAF-700
AC Powered, Sensor Activated Electronic
Gooseneck Hand Washing Faucets
EAF-750
Battery Powered, Sensor Activated Electronic
Gooseneck Hand Washing Faucets