![background image](http://html1.mh-extra.com/html/american-standard/pekoe-4332-001-xxx/pekoe-4332-001-xxx_installation-instructions_2929774001.webp)
Installation
Instructions
M 9 6 8 5 7 6
Certified to comply with ANSI A112.18.1M
CAUTION
1
INSTALL FITTING (4332.001/.400)
Turn off hot and cold water
supplies before beginning.
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
Recommended Tools
Make certain the SEAL
(1)
is properly seated in recess
of faucet body.
Insert supply HOSES
(2)
and SHANK
(3)
through center
hole of sink or mounting surface.
Assemble RUBBER WASHER
(4)
, PLASTIC WASHER
(5)
,
METAL WASHER
(6)
and threaded LOCKNUT
(7)
onto
SHANK
(3)
from underside of sink or mounting surface.
Hand tighten LOCKNUT
(7)
and check that faucet is centered.
Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(7)
.
Work your way around LOCKNUT
(7)
, tightening the screws
slightly each time until all are snug to ensure even pressure.
Tubing Cutter
1
2
5
RECESS
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-
please read these instructions carefully before
you begin.
4
3
6
7
8
4332.001.XXX
4332.400.XXX
PEKOE
SINGLE FUCTION KITCHEN FAUCET
SINGLE FUCTION BAR FAUCET