background image

53

  Depressing and holding the S button will resume the scroll

through 100%, then stop at AIR (or 21 or the GAS2

setting).

  Pressing and releasing the S button (< 2 seconds) will

advance FO2 in increments of 1% per press of the button.

  Pressing and releasing the A button momentarily (< 2

seconds) will save the setting and/or advance to SET FO2

50% DEFAULT with the Set Point flashing.

  Pressing and releasing the A button momentarily and

repeatedly (< 2 seconds) will step through the other SET F

screens.

  Depressing the A and S buttons simultaneously for 2

seconds will save the setting and revert back to the SET F

screen.

  Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will

revert to the NORM or GAUG SURF MAIN screen.

SET FO2 50% DEFAULT information includes (Fig. 46):

>  Graphics DFLT and 50

>  Set Point graphic OFF (or ON), flashing.

>  Symbols FO2 and NITROX.

  Pressing and releasing the S button (< 2 seconds) will

toggle between OFF and ON.

Fig. 46 - SET FO2 DEFAULT

Содержание ATOM 2.0

















































































































































































Отзывы: