Oceanic ATOM 2.0 Скачать руководство пользователя страница 31

Страница: 31 / 176

Upon descending on a dive, the Chronograph operation will be

terminated and reset to 0:00:00.0.

DAILY ALARM

When set ON, the DAILY ALARM will sound the Audible Alarm

and flash the Red LED at the Time set every day.

Pressing the M button momentarily 4 times (< 2 seconds

each time) while the MAIN TIME screen is displayed will

access the DAILY ALARM STATUS screen.

DAILY ALARM STATUS, information provided includes (Fig. 23):

> Alarm icon

> Graphics ALRM and ON (or OFF), flashing.

> Alarm Time Set Point (hr:min).

Pressing and releasing the S button momentarily (< 2

seconds) will toggle between ON and OFF.

Upon being toggled to ON, the Alarm will be set to sound

every day at the Time indicated.

Depressing both the A and S buttons simultaneously for 2

seconds will access the SET DAILY ALARM screen allowing

a new Time to be set.

Depressing and holding the M button for 2 seconds will

revert to the Local Default Watch Time screen.

Pressing the L button will activate the Backlight.

Fig. 23 - DAILY ALARM

Содержание ATOM 2.0

















































































































































































Результаты поиска

Содержание ATOM 2.0

Отзывы:

Похожие инструкции для ATOM 2.0

Бренды по названию

Популярные бренды

Oceanic ATOM 2.0, Руководство по эксплуатации

Результаты поиска

Содержание ATOM 2.0

Отзывы:

Похожие инструкции для ATOM 2.0

Бренды по названию

Популярные бренды