Ocean Optics Flame-S, Руководство пользователя

Страница: 107 / 130

8: Firmware and Advanced Communications
225-00000-000-11-201604 97
Packet # End Point # Bytes Pixels
0 EP2In 64 0-31
1 EP2In 64 32-63
2 EP2In 64 64-95
…
EP2In 64
119 EP2In 64 3808
–3839
120 EP2In 1 Sync Packet
Packet 0
Byte 0 Byte 1 Byte 2 Byte 3
Pixel 0 LSB Pixel 0 MSB Pixel 1 LSB Pixel 2 MSB
…
Byte 62 Byte 63
Pixel 31 LSB Pixel 31 MSB
Packet 120 – Synchronization Packet (1 byte)
Byte 0
0x69
Set Trigger Mode
Sets the Flame Trigger mode to one of the following states. If an unacceptable value is passed,
then the trigger state is unchanged.
Data Value = 0

Normal (Free running) Mode
Data Value = 1

Software Trigger Mode
Data Value = 2

External Synchronization Trigger Mode
Data Value = 3

External Hardware Trigger Mode
Byte Format
Byte 0 Byte 1 Byte 2
0x0A Data Value LSB Data Value MSB
Query Number of Plug-in Accessories
Queries the number of Plug-in accessories preset. This is determined at power up and
whenever the Plug-in Detect command is issued.