To prevent injury to the user or other people and property damage, the following instructions
must be followed. Incorrect operation may cause harm or damage. The seriousness is
classified by the warning symbols below.
Safety Precautions
This symbol indicates the possibility of death or serious injury.
Definition of symbols used in this manual are as shown below.
!
!
WARNING
Always do this.
Never do this.
!
CAUTION
This symbol indicates the possibility of injury or damage to property.
Plug in power plug
properly.
Do not modify power cord
length or share the outlet
with other appliances.
Always ensure effective
grounding.
Unplug the unit if strange
sounds, smell, or smoke
is detected.
Keep firearms away.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Otherwise, Thit may causec
electric shock or fire due to
excess heat generation.
This may cause electric shock or
fire due to heat generation.
Incorrect grounding may cause
electric shock.
This may cause fire and electric
shock.
This may cause fire.
This may cause explosion, fire and, burns.
This may cause electric shock or
fire due to heat generation.
This may cause electric shock.
This may cause failure of machine
or electric shock.
This may cause fire and electric
shock.
This may cause fire and electric
shock.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not operate with wet
hands or in damp
environment.
Do not allow water to run
into electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord
close to heating appliances.
!
!
!
!
!
WARNING
!
2
!
Do not damage or use an
unspecified power cord.
This may cause electric shock or
fire.
If the power cord is damaged, it
must be replaced by the manufac-
turer or an authorised service
center or a similarly qualified per-
son in order to avoid a hazard.
Do not point airflow at
room occupants directly.
This could be harmful to your
health.
!
Always install circuit
breaker and a dedicated
power circuit.
Incorrect installation may cause
fire and electric shock.
Do not open the unit
during operation.
This may cause electric shock.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
This may cause an explosion or
fire.
Do not disassemble or modify unit.
This may cause failure and electric shock.
!
Otherwise, This may causec
Otherwise, this may cause
This may cause explosion, fire, and burns.
