background image

CLEANING AND MAINTENANCE

Clean your air conditioner occasionally to keep it looking new. 

Be sure to unplug the unit 

before cleaning to prevent shock or fire hazards.

CAUTION

Air Filter Cleaning

The air filter should be checked at least once a

month to see if cleaning is necessary. Trapped 

particles in the filter can build up and cause an 

accumulation of frost on the cooling coils.

     Push the vent handle to the Vent Closed position 

     (where applicable).

    Open the front panel.

    Grasp the filter by the center and pull up and 

     out.

     Wash the filter using liquid dishwashing deter-

     gent and warm water. Rinse filter thoroughly. 

     Gently shake excess water from the filter. Be

     sure the filter is thoroughly dry before replacing.

     Or, instead of washing you may vacuum the 

      filter clean.

Note: 

Never use hot water over 40 C(104 F) to

   cl ean th e ai r fil ter. Never attempt to operate the  

unit without the air filter.

 

Cabinet Cleaning

     Be sure to unplug the air conditioner to prevent

     shock or fire hazard. The cabinet and front may

     be dusted with an oil-free cloth or washed with

     a cloth dampened in a solution of warm water

     and mild liquid dishwashing detergent. Rinse

     thoroughly and wipe dry.

     Never use harsh cleaners, wax or polish on the 

     cabinet front.

     Be sure to wring excess water from the cloth before

     wiping around the controls. Excess water in or around

     the controls may cause damage to the air conditioner.

      If you plan to store the air conditioner during the winter,

      remove it carefully from the window according to the 

      installation instructions. Cover it with plastic or return it

      to the original carton. 

     

Winter Storage

14

Содержание OBZ-06CR




















Отзывы: