C: Align the hole in the top rail with those in the
top of the unit as shown in Fig.B
Fig.B
Fig.C
D: Secure the top rail to the unit with the 3/8
Screws as shown in Fig.C.
NOTE:
For safety reasons, all four(4) screws
MUST
be securely fastened.
,,
HOW TO INSTALL
NOTE:
Top rail and Sliding Panels at each side are offset to provide the proper pitch to the rear of
(5/16 ). This is
Place unit on floor, a bench or a table. Be sure that the left and right window filter panels are
on the proper side. When installed, the flange for securing the panel in place to the window sill
should be facing into the room.
necessary for proper condensed water utilization and drainage. If you are
not using the Side Panels for any reason, this pitch to the rear must be maintained by other
,,
1
A. Hold the Accordion Panel
with one hand and gently
pull back the center to free
the open end. See Fig.1.
B. Slide the open end panel directly into the
side cabinet as shown in Fig. 2 & 3. Slide
the panel down. Be sure to leave enough sp-
ace to slip the top and bottom of the frame
into the rails on the cabinet.
11
Fig.1
Fig.3
Fig.2
means.
