Oce VarioPrint 4110, Руководство пользователя

Страница: 196 / 216

196 Chapter 18 Safety information (US)
EPA ENERGY STAR
®
EPA ENERGY STAR
®
Introduction
Océ-Technologies B.V. has joined the Energy Star
®
Program of the United States
Environmental Protection Agency (EPA). The purpose of the Energy Star
®
Program
is to promote the manufacturing and marketing of energy-efficient equipment,
thereby potentially reducing combustion-related pollution.
Using the energy management features outlined below prevents unnecessary power
consumption, which helps to prevent air pollution from electricity generating plants
and saves money on your utility bills.
As an Energy Star
®
Partner, Océ-Technologies B.V. has determined that the Océ
VarioPrint
®
4110/4120 meets the Energy Star
®
criteria for energy efficiency laid
down in the Energy Star Program Requirements for Imaging Equipment (Version
1.0).
Energy consumption
The energy consumption of Imaging Equipment can be determined by means of the
TEC procedure. This procedure was developed under the auspices of the United
States Environmental Protection Agency. TEC stands for Typical Electricity
Consumption. The TEC value of a product represents the energy consumed in a
week under standardized conditions. For the Océ VarioPrint
®
4110/4120 the TEC
value is listed in the Product Safety Data Sheet included in this manual.
Power Modes and Delay Times
Energy consumption and efficiency are influenced both by the product technology
and by the settings chosen by the user, especially the delay times that are selected to
enter reduced power states. The following delay times are preset.
[18]
The modes above are automatically entered after the default delay time has elapsed,
counting from the moment the last print has been produced. These settings are
recommended and for most users ensure both ease of use and low energy
[18] Preset delay times
Operating mode Default Delay Time [minutes]
Low power mode 15 (possible range: 1–240 minutes)
Sleep mode 60 (possible range: 1–240 minutes)
Off mode Press the power switch