Oce VarioPrint 2045-65 DC, Руководство по настройке и обслуживанию

Страница: 63 / 130

Define the energy save timers 63
Define the energy save timers
Introduction
You can define the following energy save timers (see ‘About the energy save
modes’ on page 62):
■
The low power timer (range 1 to 15 minutes).
■
The automatic switch off (range 1 to 90 minutes).
You can change the default values of the low power timer (15 minutes) and the
automatic switch off (90 minutes).
If the default values result in problems, due to the usage pattern, you can
request the Océ Service to increase the limits of both timers to a maximum of
240 minutes.
The machine requires 8 seconds to switch back from the low power mode.
The machine requires 8 minutes to switch back from the automatic switch off.
Before you begin
1
Enter the key operator system.
Illustration
[34] Set the energy same timers on the Océ VarioPrint 2045-65 DC
[34] Set the energy same timers on the Océ VarioPrint 2045-65 DC
Defining the low power timer
1
Activate the 'Machine' section.
2
Open the 'Basic settings' card.
3
Press the 'Energy save timers' function key to select 'Low power after' .
Use the left arrow key and right arrow key to increase or decrease in 10
second steps.