Oce VarioPrint 2045-65 DC, Руководство по настройке и обслуживанию

Страница: 30 / 130

30 Océ VarioPrint 2045-65 DC Configuration and maintenance manual
Define the end-of-job confirmation
Introduction
To help the nonexperienced user, define a supplementary user request to finish
the jobs with different job parts. To assemble the job parts, the user must press
the combine key and confirm the end of the job with the start key . If you
enable the end-of-job confirmation, the user gets a second request to press the
start Key .
Before you begin
1
Enter the key operator system.
Illustration
[12] Enable the end-of-job confirmation
[12] Enable the end-of-job confirmation
Defining the end-of-job confirmation
1
Activate the 'Machine' section.
2
Open the 'Error information' card.
3
Press the 'End-of-job confirmation' function key to select 'Enabled' or
'Disabled' .
Check
1
Exit the key operator system.
2
To check the entered selection, make a copy job with different job parts.