Oce VarioPrint 2045-65 DC, Руководство по настройке и обслуживанию

Страница: 26 / 130

26 Océ VarioPrint 2045-65 DC Configuration and maintenance manual
Change the default reset time
Introduction
The reset time is the delay period between the last user operation and the return
to the default job settings (see ‘Change or restore the default job settings’ on
page 24).
A timer starts when the user presses a key, opens a door or places the originals.
If the reset time has expired, the Océ VarioPrint 2045-65 DC returns to the
default job settings. The user loses the changed settings.
The default reset time is 60 seconds but you can set any other time from 10
seconds up to 5 minutes. If no reset time is defined, the user can restore the
default settings using the correction key .
Before you begin
1
Enter the key operator system.
Illustration
[9] Define the reset time
[9] Define the reset time
Changing the reset time
1
Activate the 'Machine' section.
2
Open the 'Basic settings' card.
3
Press the 'Reset time' function key.
Press the arrow keys to adjust the reset time. Use the left arrow key or the
right arrow key to decrease or increase in 10 second steps.