Oce TDS400-CS, Руководство пользователя

Страница: 128 / 326

128 User manual
Define the set time-out of a copy job
Introduction
When the scanner operator panel remains unused for a time after a set was
opened, the set closes automatically. Use the Océ Settings Editor to define the
panel time-out.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following
steps to log on.
1.
Click 'File' and select 'Log on'.
2.
Select 'Key operator' and enter the password.
How to define the set time-out of a copy job
1.
Click 'View' and select 'KO settings'.
2.
Navigate to KO - Scanner - Timers - Set time-out.
3.
Define the required settings.
4.
Click 'Apply'.
5.
Click 'File' and select 'Log off' to prevent unauthorised use.
Result
The set time-out of a copy job is defined.