Oce Repro Desk, Руководство пользователя

Страница: 277 / 464

Print on an Océ 9600 277
Other adjustments
From the Other tab you can adapt the light intensity of the print head, change
the sleepmode time-out, correct the 1:1 projection of the image onto the paper,
print the system settings, make a test print or make a demo print.
▼
Adapt the light intensity of the print head
1
Make a basic test print by clicking on the Test Print Basic button.
2
Determine which block of the print head related test pattern on the test print
has the correct light intensity.
3
Enter the number next to the correct block in the Enter Value Field and click
on the Block Light Intensity button.
The light intensity of the print head is now adapted.
Specify the sleepmode time-out
The sleepmode is activated when the printer
does not receive any print commands during the predefined time (in seconds)
or does not detect any user interaction. The value of 0 indicates that sleepmode
is disabled.
▼
Specify the sleepmode time-out
1
Enter the desired value in the Enter Value field and click on the Sleepmode
Time-out button.
After confirmation the time-out value is set automatically.
▼
Adapt the image length
1
Make a basic test print by clicking on the Test Print Basic button.
2
Measure the distance between the A and B markers on the test print.
3
Enter this value (in tenths of millimeters) in the Enter Value field and click on
the Length Marker ‘A’ and ‘B’ button.
The 1: 1 image length is now automatically adapted.
Note:
To print the system settings, basic test print or demo test print, you just
have to click on the appropriate buttons. The prints will be made automatically.
Key operator settings
From the Key Operator sub menu you can also change your key operator
password, which you need to gain access to the key operator settings.