Oce Repro Desk, Руководство пользователя

Страница: 133 / 464

Imaging properties 133
Folder Options
The folder of the Océ printer can be equipped with a number of
options. Depending on the configuration of the folder you are using, you can
specify the following options:
■
Don’t Fold: Output will not be folded.
■
Fold: Output will be folded without any options.
■
Fold & Punch: Output will be folded, and punched (if the punch unit is
installed).
■
Fold & Reinforce: Output will be folded, and a reinforcement strip will be
added (if reinforcement unit is installed).
■
First Fold Exit: Output will only be folded in one direction (first fold), and
then delivered in the First Fold Delivery tray.
Note:
To use punching, one of the belts must be selected for the output delivery.
Method
You can specify one of the following folding methods: Standard,
Ericsson or AFNOR.
Folding size
You can specify the Folding Width and Folding Height.
Binding Edge
You can select if you want a binding edge, and specify the size of
that edge.