23
4 Set Up Network Connection
The display returns to the standby mode:
The machine may enter the standby mode (Auto Clear function) while you are
setting it up. Make the setting again from the main menu.
The display turned off:
The machine may enter the sleep mode while you are setting it up. Press
[Power] to turn the machine back ON and continue the setup.
1
Press [Additional Functions].
2
Press [
] or [
] to select <9. SYSTEM
SETTINGS>, then press [
OK
].
9 . S Y S T E M
S E T T I N G S
A D D .
F U N C T I O N S
3
Press [
] or [
] to select <5. NETWORK
SETTINGS>, then press [
OK
].
5 . N E T W O R K
S E T T I N G S
S Y S T E M
S E T T I N G S
4
Confirm that <1. TCP/IP SETTINGS> is displayed,
then press [
OK
].
1 . T C P / I P
S E T T I N G S
N E T W O R K
S E T T I N G S
5
Confirm that <1. IP ADDRESS AUTO.> is
displayed, then press [
OK
].
1 . I P
A D D R E S S A U T O .
T C P / I P
S E T T I N G S
6
Press [
] or [
] to select <OFF>, then press
[
OK
].
O F F
I P
A D D R E S S
A U T O .
7
Confirm that <2. IP ADDRESS> is displayed, then
press [
OK
].
2 . I P
A D D R E S S
T C P / I P
S E T T I N G S
●
●
8
Use – [numeric keys] to enter the IP address,
then press [
OK
].
Ex.
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
I P
A D D R E S S
9
Confirm that <3. SUBNET MASK> is displayed,
then press [
OK
].
3 . S U B N E T
M A S K
T C P / I P
S E T T I N G S
10
Use – [numeric keys] to enter the subnet
mask, then press [
OK
].
Ex.
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
S U B N E T
M A S K
11
Confirm that <4. GATEWAY ADDRESS> is
displayed, then press [
OK
].
4 . G E T E W A Y
A D D R E S S
T C P / I P
S E T T I N G S
12
Use – [numeric keys] to enter the gateway
address number, then press [
OK
].
Ex.
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
G A T E W A Y
A D D R E S S
13
Turn the main power switch on the right side
of the machine to “ “ side, wait at least 10
seconds, and then press the main power
switch to “ “ side.
Change to the IP address, subnet mask, and gateway
address settings will be effective after restarting the
machine.
If you send documents via e-mail and I-fax, specify the E-
mail/I-fax settings. (See “Network Settings,” in the e-
Manual.)
For instructions for confirming IP address settings, see
“Check IP Address Setting,” on p. 22.
–
–
–
Manual Setting
This is the setting for the static IP address. If the machine obtains IP address automatically in “Automatic Setting,”
on p. 22, skip this procedure.
