8
2 Set Up the Machine
Install Drum Unit
This section describes the installation procedure for the drum unit.
1
Open the left cover.
2
Open the package of the new drum unit and
remove the protective packing material (A).
3
Hold the unit by its grips on both sides.
4
Align the marks on both sides of the drum
unit (B) with the marks on the machine (A),
and push the unit into the machine as far as it
will go.
5
After the unit is completely inserted, remove the
orange paper.
Do not touch the drum (A) as the image quality of printouts
may deteriorate.
