10
2 Set Up the Machine
3
Attach the guide to the slots of the desired
paper size.
Make sure to set the guide to the mark for the size of the
paper to be loaded correctly. If the guide is positioned
incorrectly, it may cause paper jams, dirty prints, etc.
4
Even the edges of the paper stack.
5
Load the paper stack of the appropriate size
with the print side facing up.
When loading paper, be careful not to cut your fingers on
the edges of the paper.
Make sure the back edge of the paper stack touches the
rear paper end guide (A), the paper stack should not
exceed the load limit mark (B), and the load is under the
small fins (C) on the paper guides.
The paper drawer holds approximately 500 sheets of
paper (21 lb bond (80 g/m
2
)).
–
–
–
