Oce CS6407, Основное руководство по эксплуатации

Страница: 36 / 100

Océ 6407 Basic Operation Guide
36
11
Feed back the media.
Feed back the media while pressing the center of the
media gently at the supply side.
Confi rm that the front media edge precedes the
closed front cover by approx. 30 cm.
30cm
Front cover
Important!
- This step is important to set the media properly.
12
Supply side
Set the pressure to “Normal” by rotating the
pressure control knob counterclockwise.
Point to be checked again
- Check that the media on the platen has no
wave or wrinkle.
13
With pressing the media
edge guard’s your side part,
move each media edge
guard. Align each media edge
guard’s notch to the media
edge.
(1) (2)
Notch
Set the media edge guards.
(1) With pressing the media edge guard’s your side part,
move each media edge guard to the media edge.
(2) Align each media edge guard’s notch to the media
edge.
Check that the media edge guards are not under the
media or thick media is not caught by having been
inserted forcibly.
CAUTION
- The print operation without media edge guards may
cause a media jam.
14
Close the front cover, and set the protection
bar.
15
C H E C K E D G E G U A R D
✻
O K ?
Press the key.