Oce CS4300, Руководство пользователя

Страница: 38 / 136

Wake and Sleep modes
Introduction
With the main power switch ON, scanner power can be set in Sleep mode and Wake
mode. Sleep mode is the energy saving mode.
The scanner cannot scan when in the Sleep mode.
Wake mode is the full power ON mode for scanner operation.
The scanner will go from Wake mode into Sleep mode:
■
Automatically: after a set idle time (see Automatic Power functions).
■
Automatically: with the Timer (see Automatic Power functions).
■
Manually: when you hold the power button down for 3 seconds.
The scanner will go into wake mode:
■
Automatically: with the Timer (see Automatic Power functions).
■
When you feed a document into the scanner.
■
When you press any button on the panel.
Advantages with using Wake-up and Sleep modes:
Ready faster:
You turn the scanner OFF and ON (sleep/wake-up) by pressing the power key on the
panel. The scanner skips its init sequence and is ready to scan sooner than with Main
Power OFF to ON.
Convenience:
When OFF (LED is red) the scanner can be powered up (Wake-up) easily by pressing
the power key or just by inserting paper into the scanner, thereby indicating you wish to
scan.
Timer function:
Scanner power with Wake-up and Sleep, can be setup and controlled through the Océ
Scanner Agent software timer week schedule feature or through an idle time setting.
Save energy:
Sleep mode runs at low power values.
Chapter 4 - Turning Power ON/OFF - Wake/Sleep Mode 38
Wake and Sleep modes