Oce CS240, Руководство по эксплуатации

Страница: 167 / 594

CS240/CS231 4-69
Basic copy operations 4
Punching holes in copies ("Punch" settings)
!
Detail
In order for holes to be punched in the copies, all of the following conditions must be met.
The paper width must be between 280 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the document is positioned. If an
Original Direction setting is not selected, holes may not be punched in the copies as desired.
For details on specifying the document orientation, refer to "Selecting the document orientation
("Original Direction" settings)" on page 4-23.
2
Note
The Punch settings are available only if the punch kit is installed on the optional finisher.
When Punch kit PK-512 and/or Finisher FS-517/FS-608 are installed
When Punch kit PK-513 and/or Finisher FS-517/FS-608 are installed
When Finisher FS-519 is installed (CS231)
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
Tray Paper weight Paper size
Finishing Tray 1 64 g/m
2
to 128 g/m
2
"4-Hole" Punch setting:
A3
w , B4 w , A4 v , B5 v , 11 e 17 w , 8-1/2 e 11 v , 7-1/4 e 10-
1/2 v , 8K w , 16K v
Tray Paper weight Paper size
Finishing Tray 1 64 g/m
2
to 128 g/m
2
"4-Hole" Punch setting: A3 w , B4 w , A4 v , B5 v
Paper weight Paper size
Plain paper (64 g/m
2
to 90 g/m
2
)
Thick paper 1/1+/2
(91 g/m
2
to 209 g/m
2
)
A3 w , A4 v , B5 w