Oce CS 4050, Руководство по установке

Страница: 23 / 51

Scanner operation 23
Inserting a document
You can insert a document into the scanner right or center-aligned, using
measurements in inches, millimeters, or scanner units. You make these settings
in the Océ Scan software.
Insertion slot
■
A ruler at the top of the insertion slot give the width of a right-aligned
document. You can slide out this ruler to switch to or from millimeters and
inches.
■
Markers at the bottom of the insertion slot help you center-align standard size
documents for scanning.
Note:
It is preferable to center-align a document to position it
symmetrically on the feed rollers during a scan.
■
You can also measure a document in scanner units.
Scanner units Media size Document width
1.4 Minimum (A5) 6.0" 152 mm
2 A-Size (letter) and near A4 8.5" 216 mm
2.6 B-Size (11") 11.0" 280 mm
2.8 A3 (297 mm) 11.9" 302 mm
3 Near A3 and near B-Size 12.7" 323 mm
3.9 A2 (420 mm) 16.5" 420 mm
4 C-Size and near A2 17.0" 430 mm
5.2 D-Size (22") 22.0" 560 mm
5.5 A1 (595 mm) 23.3" 592 mm
6 Near A1 and near D-Size 25.4" 646 mm
7.8 A0 Portrait (841 mm) 33.1" 840 mm
8 E-Size and near A0 34.0" 862 mm
11.2 E-Size Landscape 44.0” 1118 mm
11 A0 Landscape 46.8” 1189 mm
11.8 Maximum scan width 50.0" 1270 mm
Maximum media size handled 51.5" 1310 mm