Oce CPS800, Руководство пользователя

Страница: 33 / 174

33
The Operator Attention Light (optional)
The Operator Attention Light (optional)
Introduction
The operator panel informs the operator when the system needs operator interaction.
However in most cases the operator takes care of more than one machine.
The operator attention light is used to indicate the state of the system when the
operator is not close to the system.
[6]
[6] The Operator Attention Light
The system can be in different states (statuses). The table below shows the possible
states in which the system needs operator interaction.
[14]
Note: To improve productivity, the operator is warned some time before the system
actually stops (warning).
[14] System States
State Information
Idle System has no jobs in the job queue.
System in error Machine Recoverable Error/Operator Recoverable Error/Permanent
Error etc.
Job stopped Due to a contradiction, check print, stop after a page etc.
Nearly out of toner After some time without adding toner the system will stop.
Next job
contradiction After some time without removing the contradiction the system will stop.
Next job 'On hold' After some time without removing the 'On hold' flag the system will
stop.