Oce CPS800, Руководство пользователя

Страница: 122 / 174

122 Chapter 5 The Copy Function
Combine different sets of originals
Note: The arrow pointers which indicate the selected settings can appear in two
variations. A solid arrow indicates that the setting is the same in all the subsets
in the job. A transparent arrow indicates that the setting is ambiguous, e.g. subset
one is 2-sided whereas subset two is 1-sided. When the operator defines subset 3, the
transparent arrow appears. The transparent arrow indicates that this particular
setting has more than one value.
7.
Enter the number of prints and press the Start key ( ).
Note:
The settings of the last subset remain valid for the next subset.
How to delete a subset
1.
Wait until the scan of a subset has finished. Press the Correction key ( ) on the
operator panel. The screen displays the message 'Delete last subset?'
Note: Press the Correction key ( ) three times when the default settings in this
subset were changed.
2.
Press 'Yes' to delete the last subset.
[53]
[53] Deleting a Subset
Note: Each time the operator presses the Correction key ( ), the last subset is
deleted. This means that you can delete more than one subset. Remember the
following. When you have deleted the last subset and you press the Correction
key
again, the job is deleted.