Oce CPS800, Руководство пользователя

Страница: 124 / 174

124 Chapter 5 The Copy Function
Make a copy with the special feeder
Make a copy with the special feeder
Introduction
The special feeder is a separate paper feed option that the operator uses
independently or in combination with the four paper trays in the paper compartment.
This option allows the Océ CPS800
®
to accept paper that does not come out of the
paper trays. The operator manually feeds one sheet at a time.
Note: The special feeder accepts minimum A4/Letter and maximum A3/Tabloid size
paper (minimum paperweight 75 g/m
2
or 20 lb.bond, maximum paper weight 250
g/m
2
or 140 lb. index). You cannot use full bleed materials in the special feeder
When to do
The operator uses the special feeder to introduce single sheets of paper for a print or
copy job. The special feeder can be used in case the operator has no access to the
paper trays or if the operator does not want to change the configuration of the paper
trays.
How to make a copy with the special feeder
1.
Put the originals into the automatic document feeder or put one original on the glass
plate.
2.
Select the 'Copy' menu.
3.
Select the 'Standard job' template. The 'Basic settings' section opens.
4.
Define the settings for 'Original' and 'Print'.
5.
Indicate 'Special feeder'.
6.
Describe the 'Size'.
7.
Enter the number of prints and press the Start key ( ).
Note: It is not necessary to define the paper type for the special feeder.
Result
The operator panel displays the message 'Load special feeder'. The operator
manually puts the paper into the special feeder and the job starts.