Oce 3275, Руководство пользователя

Страница: 236 / 340

12-4 Tandem Mode
Tandem Mode
Tandem Mode Operation (continued)
NOTE: The tandem mode cannot be selected/continued in the cases shown below. The message “Please
wait/ Reserve is not available in Sub machine,” “Sub machine error/ Please check sub machine,” or
“Please check sub machine” will be displayed, as required.
• The tandem mode cannot be selected while the secondary copier is in the off state, due to Auto
shut-off. Press [POWER SAVER ON/OFF] to release it.
• Selected tandem mode will be released automatically when the secondary copier activates Auto
shut-off. Press [POWER SAVER ON/OFF] to release it, then select the tandem mode again to
restart the procedure.
• When any problem occurs in the secondary copier, such as a paper misfeed or lack of paper, the
secondary copier will be unavailable for printing; however, the problem will not cause tandem mode
to be released. Take the appropriate troubleshooting measures to be ready for copying.
• Tandem printing job cannot be started if 5 reserve jobs (not in tandem mode) are entered on the
secondary copier. Wait until the reserve jobs are completed on the secondary copier.
• Selected tandem mode will be released automatically when the primary copier activates Auto low
power/Auto shut-off. Press [POWER SAVER ON/OFF] to release Auto shut-off if required, then
select the tandem mode again to restart the procedure.
5 Select the desired copying conditions on the primary copier.
NOTE: Ordinary copying operation is still available on the secondary copier during the tandem mode setting.
6 Enter print quantity on the primary copier, using the keypad.
When a print quantity amount of 100 is entered, the primary and secondary copiers
will each copy and output 50 sheets.
NOTES: • Print quantity must be set for [3] or more copies to activate the tandem mode.
• When the print quantity entered is an odd number, the primary copier will copy and output one
sheet/set more than the secondary copier to accommodate the job.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass of the primary copier.
8 Press [
START
] on the control panel of the primary copier.
The Sub icon will display on the Basic Screen of the secondary copier to indicate that
the two copiers will start working in tandem.
The tandem mode will be released automatically when the tandem mode copying is
completed, and the Master and Sub icons on each Basic Screen will disappear.
Tip: Entering reserve job during Tandem mode copying
If scanning of the next reserved job is performed during the tandem mode copying, that job will also
be performed in the tandem mode. Up to 5 jobs including the present job can be reserved.
Tip: Interrupt mode during Tandem mode copying
Interrupt copying is available only on the copier with [INTERRUPT] pressed. The tandem mode
copying on the copier in interrupt mode will be suspended until the interrupt copying is completed.
If the interrupt mode period is of long standing, the Allocation recovery mode will activate to enable
the other copier to handle the remaining print quantity.