Oce 3165, Руководство оператора

Страница: 21 / 103

Configuration management 21
Changing the initial operating mode on a Network Copier
If the Océ 3165 Network Copier is used mainly for printing, you may decide
to set the print mode as initial mode. In that case, users of the Network Copier
must switch to the copy mode first before they can make a copy. And, of
course, if the Network Copier is used mainly for copying, you should set the
initial operating mode to copying.
Note:
Depending on the selected mode, you may want to change the time delay
for printing (see ‘Defining the time delay for print jobs’ on page 36).
[9] Initial operating mode set to copying
[10] Initial operating mode set to printing
▼
Changing the initial operating mode
1
Access the key operator system (see page 13).
2
Open the ‘Machine’ section and select the ‘Defaults’ settings.
3
Press the function button ‘Standard usage’ to change the current standard
mode setting (see figure 7).
4
Quit the key operator system.