Observer AWS3155, Руководство пользователя

Страница: 15 / 86

— 13 — — 12 —
INSTALLATION
Installing the Camera(s)
y
Screw Antenna clockwise into rear of
camera.
U
Connect one end of an AC adapter to
the camera’s power pigtail and plug the
other end of the adapter to a 120 volt AC
(standard indoor) power outlet.
V
Make sure the Power status LED turns
red and the Link Status LED turns green.
If it doesn’t, try reconnecting the AC
adapter, and make sure the power outlet
is not controlled by a wall switch.
You should now have video on your Live
screen.
Repeat steps for additional camera(s).
Power Status
LED
Link Status
LED
TIP:
Pair additional cameras as shown on page 25.
TIP:
A 6 foot power extension cable is included for
your camera setup if needed.