driver installation for your operating system.
Warning: Do not connect or disconnect motor cables while the PC is
powered on. The OASIS-4i card may be applying power to the motors,
in which case a connection or disconnection could damage the OASIS-
4i card.
Driver Installation Procedure for Windows
2000/XP
1) Switch on PC and boot into Window.
2) The 'Add New Hardware Wizard' should appear.
3) Select 'Search for best driver for your device' and press next.
4) Insert OASIS-4i installation CD into your CD-Rom drive and select
'Specify a Location' with 'D:' as the source for the driver. (Where D:
is the CD-Rom drive letter).
5) Windows should find 'OASIS-4i : 4-axis PCI Stage Controller'.
Press next.
6) After drivers and dll's have been copied to the relevant directories,
press 'Finish'.
7) Re-boot the PC before operation of the board and/or installation of
the SDK or other software.
8) A 'WinDriver Virtual Device' may be found after a re-boot. If so, a
suitable driver is included in the 'Drivers' folder of the OASIS-4i
installation CD.
Driver Installation Procedure for Windows 98/Me
1) Switch on PC and boot into Window.
2) The 'Add New Hardware Wizard' should appear.
3) Select 'Search for best driver for your device' and press next.
4) Insert OASIS-4i installation CD into your CD-Rom drive and select
'Specify a Location' with 'D:' as the source for the driver. (Where D:
is the CD-Rom drive letter).
