Note that your OASIS-4i may have been provided as part of an
integrated automation system. There may be aspects of your system
configuration that are specialized for your application. In these
situations, please contact your system vendor for details regarding
your configuration before proceeding.
Installation Requirements
In order to install the OASIS-4i card into your system, you will need the
following:
•
PC with one three-quarter length PCI slot available
•
Windows®
XP, Windows®
2000, Windows® 95/98/Me, or
Windows® NT4.0 operating system
•
CD-ROM drive
•
One free (hard disk style), power connector, with 2A at 12V
available
•
Cross-head screwdriver
•
OASIS-4i Installation CD
Installation Process
The OASIS-4i installation process consists of three distinct steps:
1.
Hardware Installation
. In this step, you will physically place
the OASIS-4i card inside your computer.
2.
Driver Installation
. After installing the hardware, you need to
install the driver software so that Windows recognizes the card
and application software can use it.
3.
Configuration
. You will need to configure the OASIS-4i card to
match your particular system setup.
Once these steps are complete, the OASIS-4i card is generally ready
for use. However, if you are using a 3
rd
party application, you may
need to install additional software so that your application package can
use the OASIS-4i controller to drive the motorized components of your
system. Refer to your application / system documentation for further
details on how to configure the application for use with OASIS-4i.
