Connector Identification
Refer to the following diagram for information regarding the various
connectors available on the OASIS-4i card.
SK1 – XYZ
output, video
I/O, general
logic output
PL1 –
Trackball
serial port
PCI Connector
PL2 – Fourth
axis output
SK3,4 –
Option card
PL5 – Motor
power
SK2 –
Option card
PL7 –
Analogue port
for Joystick or
OI-SNP
PL6 –
Serial
port
Figure 1. OASIS-4i Connectors
Hardware Installation Procedure
Preparing the
PC case
1) Switch off the PC and unplug from the mains to disable any
standby power.
2) Remove the system unit cover or side panel.
3) Select a suitable PCI slot with no obstructions (preferably one with
adequate air-flow from the auxiliary fan), and remove blanking
panel as necessary.
