17. When the food is cooked, take out the bowl. To remove food, use a pair of
tongs to lift the food out of the bowl.
18.
Caution:
The bowl should never be turn up side down with the grid.
19. After hot air frying, the bowl, the grid and the food are very hot. Depending
on the type of food cooked in the appliance, be careful as steam may
escape from the bowl.
20. When a batch of food is ready, the appliance is instantly ready for
preparing another batch of food.
Using the grill plate
1. Place the grill grid in the bowl of the appliance.
2. Press , then press on the screen to select the Grill mode.
3. Start the Grill mode by pressing . This will launch the preheating phase
(timing: 15 minutes).
4. When you hear the timer sound, the preheating phase has finished.
5. Take the bowl out the appliance and place it on a heat-resistant surface.
Caution:
the bowl and the grill grid are very hot. Use a pair of tongs to
place the food on the grill plate.
6. Place the food on the grill plate and put back the bowl into the appliance.
7. Select the required cooking time by pressing and buttons (see
section ‘Cooking guide’).
8. Press the Start button to launch the cooking. The temperature and
remaining cooking time will alternate on the on-screen display.
Note:
the pieces of meat required to turn them at half cooking.
Excess oil from the food is collected in the bottom of the bowl.
9. When you hear the timer sound, the cooking has finished. Take the bowl
out the appliance and place it on a heat-resistant surface.
10. Check if the food is ready. If the food is not ready yet, put it back on the
appliance and set the timer for a few extra minutes.
11. When the food is cooked, take out the bowl. To remove food, use a pair of
tongs to lift the food out the bowl.
Caution:
After hot frying, the bowl, the grid and the food are very hot.
Dehydration
1. Place the grid in the bowl of the appliance.
2. Press , then adjust the temperature by pressing and button to 80°C
on the digital screen.
3. Then set the desired cooking time by pressing the button and adjusting
the time with and button. You can set the timing from 1 hour to 4
hours.
4. Press the Start button to launch the dehydration process. The selected
temperature and remaining cooking time will alternate on the screen
display.
5. When you hear the timer sound, the cooking has finished. Take the bowl
out the appliance and place it on a heat-resistant surface.
6. Check if the food is ready. If the food is not ready yet, put it back on the
appliance and set the timer for a few extra minutes.
7. When the food is cooked, take out the bowl. To remove food, use a pair of
tongs to lift the food out the bowl.
58
AG5058S0_ AG505DS0 Easy Fry & Grill dig_RS_1021.indd 58
AG5058S0_ AG505DS0 Easy Fry & Grill dig_RS_1021.indd 58
2021-10-08 18:59
2021-10-08 18:59