B_1RREC / POU_1RREC Series
Installation & Service Instructions
030099-499 RevOrig
pg 22 of 22
© Copyright 2014 OASIS Europe
Cleaning and Sanitizing Instructions:
Cleaning Procedure
Water coolers need to be cleaned periodically to prevent mineral build-up inside the heating tank. The
frequency of cleaning is determined by the quantity of minerals in the water and the amount of water
used. The hot tank may require cleaning when:
•
Normal hot water flow appears restricted.
•
Noisy heating cycles are heard.
•
Mineral build-up has imparted a taste to the water.
General Cabinetry Cleaning:
•
Turn off the power at the wall socket and remove the power cord at the rear of the machine.
•
Wear clean rubber gloves to carry out the cleaning functions.
•
Remove and clean the drip tray assembly.
•
Wipe down all machine surfaces with a mild soap solution or mild cleaner.
•
Replace the drip tray.
•
Re-connect the machine and turn on the power and check for correct operation
Sanitization
•
Cook and Cold Circuit –Please refer to “Specific Cooler Instruction” (
HTML
Link
)
•
Hot and Cold Circuit –Please refer to “Specific Cooler Instruction” (
HTML
Link
)
•
Carbonation Circuit –Please refer to “Specific Cooler Instruction” (
HTML
Link
)
•
Hot Tank –Please refer to “Specific Component Instruction” (
HTML Link
)
THIS APPLIANCE MUST BE EARTHED.
This appliance is not suitable for unsupervised use by young children or aged and infirm persons. The warranty,
Underwriter’s Laboratory certification and CE certification for this machine are automatically void if any alteration,
modification, or combination with any other machine or device is deemed to be the source of any claim. The UL and CE
certification may be void as the result of any alteration or modification. The manufacturer accepts no liability resulting from
any alteration, modification, or combination with any other machine or device.
EXCEPT AS SET FORTH HEREIN, THE MANUFACTURER MAKES NO OTHER WARRANTY, GUARANTEE,
OR AGREEMENT EXPRESSED, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Manufacturing location:
Europe
OASIS East Sp.z o.o.
Gutenberga 20 str
44-164 Gliwice SEZ, Poland
Tel: +48 32 332 6501 ; Fax: +48 32 332 6500
www.oasis.ie
In North America, contact:
OASIS INTERNATIONAL, LLC
222 East Campus View Blvd. • Columbus, OH 43235 U.S.A.
1-800-64-OASIS (1-800-646-2747)
www.oasiswatercoolers.com
