B_1RREC / POU_1RREC Series
Installation & Service Instructions
030099-499 RevOrig
pg 9 of 22
© Copyright 2014 OASIS Europe
CO2 bottle location
•
CO2 bottle can be located in the filter compartment. To gain access to filter compartment see
relevant section in this manual.
A base and Velcro strap are supplied to secure the bottle at the
installation site. Do not transport cooler with the CO2 bottle inside the filter compartment as this
could damage the cooler. The total max height of CO2 bottle that can be fitted inside the
compartment is 440mm The max diameter of the CO2 bottle is 160mm.
•
Larger CO2 bottles must be installed away from the cooler
CO2 bottle regulator
•
A CO2 regulator may be supplied with the cooler depending on model. This is located inside the
filter compartment
•
CO2 regulators may be adjustable depending on model
•
CO2 regulators may differ depending on region
Spare Parts
•
Oasis International supplies spare parts for all of its watercoolers. For European service, please
check the OASIS web-site at www.oasis.ie for full illustrated parts breakdowns that give full
details of all replacement parts. For service from the United States, refer to the OASIS
International web-site www.oasiscoolers.com
Pre-Delivery Inspection:
1.
Examine the packaging for signs of damage – report any damage to the carrier.
2.
Remove the carton from the cooler – cut the tape and lift the carton from the cooler. Store the carton
and foam packaging for repacking the cooler prior to shipping it to the customer.
3.
Remove the shipping bag from the cooler
4.
Carry out a general inspection of the cooler, ensuring that :
a)
There are no marks or physical damage to the cooler
b)
All accessories are present
c)
All wires and electrical connections are in place at the back of the cooler
d)
All tubes and water connections are in place
