B_1RREC / POU_1RREC Series
Installation & Service Instructions
030099-499 RevOrig
pg 10 of 22
© Copyright 2014 OASIS Europe
e)
That the cooler is clean and dust free
5.
Install your filtration system (see relevant section in this manual)
6.
Replace the shipping bag over the water cooler
7.
Replace the carton over the top of the cooler and tape ends
8.
The cooler is now ready for transportation to the customer’s premises
NOTE: Whenever you transport the cooler to or from your premises, you should ensure that a
shipping bag is placed over the cooler. This will prevent damage to the cabinet caused by coolers
rubbing against one another in the back of the truck or van.
Filter Installation:
The B_1RREC & POU_1RREC series coolers contain a large filter compartment that can be directly
accessed from the front of the unit.
Accessing Filter Compartment
•
Lift out and remove the drip tray
•
Depress the clip visible through the slot in the alcove and lean the top of the door forward
•
Remove the door from the cooler
•
The POU water supply tube is now visible on the left hand side of the filter compartment
