Oasis Baywash i5, Руководство по эксплуатации

Страница: 9 / 52

SAFETY
REQUIREMENTS
PAGE 9 OF 52
1. Only those employees specifically instructed by the location manager will be
permitted to enter the wash bay to perform inspections or maintenance.
2. Do not enter the wash bay when the equipment is operating.
3. Always exercise caution when walking through the wash area, as slippery conditions
may be present.
4. Be cautious when walking through the wash bay to avoid running into or tripping
over equipment.
5. Do not ever run through the wash area or control room.
6. Do not perform any work on equipment without first performing Lock-Out Safety
Precautions.
7. When maintenance requires that a piece of equipment be in operation, one qualified
maintenance person must stay at the power disconnect switch while that equipment is
operating.
8. All electrically powered equipment must have manually operated disconnects capable
of being locked in the “OFF” position. Equipment that has been “locked out” for any
reason should only be restarted by the person who performed the “lock out”
operation.
9. Do no attempt to repair or adjust any pressurized liquid or pneumatic part, hose, pipe
or fitting while that equipment is in operation.
10. Any “STOP” switch activated must be reset only by the person who initiated the
operation.
11. Electrical connections and repairs are to be repaired only by a qualified Licensed
Electrician.
12. All cleaning solutions, washing solutions, and oils should be stored in a well
ventilated area.
13. Clean up fluid spills or leaks immediately to prevent hazardous safety conditions.
14. Be careful to follow all safety procedures on MSDS sheets for each chemical product
used.
15. All new employees must be thoroughly trained in safe operating and maintenance
practices.
16. All employees must attend periodically scheduled safety procedure sessions.
17. Do not operate any piece of equipment that requires safety covers with those covers
removed or improperly installed.
18. Do not allow any part of your body, loose clothing or other objects to come in contact
with moving machinery.
19. Do not wear loose fitting clothing or jewelry around moving machinery.
20. At least two qualified maintenance technicians must be present when performing
equipment repairs or preventative maintenance.
21. When working on any equipment that is higher than a person’s shoulders, always use
a fiberglass ladder that is in good working condition.