•
#2 Phillips Screwdriver/Bit
1.
Read instructions and check that all parts are accounted for
before you start building.
2.
Begin assembly as close to final product location as possible.
3.
Additional assembly instructions may be required depending on
specification of product ordered.
4.
Read all Operating & Safety instructions before using this Oasis
Berco furnishing.
Space to think
Tools needed for assembly:
Before you start:
www.oasis-berco.com
Hardware/Accessory Kit:
•
Qty Depends on Size of Table - #10
x 1” Wood Screws
OPTIONAL PEDESTAL TABLE
A.
If applicable, install electrical following manufacturer directions provided.
B.
Attach top to legs using #10 x 1” Wood Screws in pre-drilled locations in
the table top.
C.
Note: There may be more than leg to install based on the size of the
table.
D.
If applicable, connect electrical outlet to extension cord coming out of the
wall grommet. Push extra cord into the wall through the grommet
opening.
St
e
p
1
