•
3.5MM Allen Wrench
•
Torx – 30 driver bit
•
#2 phillips driver bit
•
Utility Knife
•
Lint Roller
•
White Gloves
1.
Read instructions and check that all parts are accounted for
before you start building.
2.
Begin assembly as close to final product location as possible.
3.
Additional assembly instructions may be required depending on
specification of product ordered.
4.
Read all Operating & Safety instructions before using this Oasis
Berco furnishing.
St
e
p
1
A.
White gloves are recommended during installation to avoid dirt or grease transfer
to the Oasis unit.
B.
Start by assembling the rear glazed wall. This is shipped “knocked down” due to
the size.
C.
The parts you need include: left post, right post, base rail and top rail.
D.
Secure the base rail (threshold) to the posts first using 4 - #8 x 2 ½” self tapping
screws. The radius portion of the post should be facing outside the Pod.
E.
Secure the top rail to the posts using 2 - #8 x 2 ½” self tapping screws. The flat face
of the top rail should be facing the outside of the Pod.
F.
Secure header angle brackets to side posts using 2 – ¼ -20 x 2” machine screws.
Space to think
Tools needed for assembly:
Before you start:
www.oasis-berco.com
Hardware/Accessory Kit:
•
12 - #8 x 2 ½” self tapping screws
•
12 – ¼-20 x 2” machine screws
•
4 - #8 x 1 ½” wood screws
•
4 - #8 x ¾” wood screws
•
Double Handle Glass Suction Cups –
2 per order
•
Glass Door Handle
•
Glazing Seal
•
“I” Gasket
•
“V” Seal
•
Alcohol Wipes
