background image

5

WARNINGS

 / 

SA

fe

Ty

 warnIngs

WARNINGS & SAfeTy INSTRUCTIONS

 warnIngs & safety InstructIons

• 

Be certain that the table is completely lowered prior to   

discharging an ambulatory patient. The patient may lose   

balance and fall. Do not leave clients unattended when table is 

set at its highest level.

• 

The table weighs as much as 225 lbs. (102 kg.) DO NOT lift 

or move the unit without using proper safely procedures or 

equipment. DO NOT turn the table on its side for any reason. 

To do so could cause damage to the base and will void the warranty. 

There are no serviceable items that require this action. Never 

lift the table by grasping the table top as the table top is not 

designed to hold the weight of the base and you could damage 

the table.

• 

When operating the controls and making any and all adjustments 

to the table, move hands and feet away from the working mechanism 

of the table. 

• 

The optional arm rests can be repositioned to allow a client to get 

on and off the table easily. When making adjustments to the arm 

rests, make certain that the client’s arms are away from the working 

mechanism.

• 

DO NOT sit on arm rests, the elevated backrest or leg rest. DO 

NOT put excessive weight on the side arm rests. DO NOT use 

them in assisting the client on and off the table.

• 

DO NOT put excessive weight or pressure on the QuickLock

 

Face Rest. Excessive pressure can cause premature failure of the 

QuickLock

 Face Rest. Do Not extend the dowels of the Face Rest 

further than 3” from the table edge to ensure a stable connection.

• 

DO NOT store or place anything on the cabinet hood under the 

backrest as this can cause damage to the top and or hood and will 

void the warranty.

• 

Maximum Working Load Rating (client and accessories): 500 lbs. 

(226 kg.) 

• 

Every 3 months check nuts & bolts and physical connection points 

for any loose parts. Tighten as needed.

• 

Maximum Shelf load weight: 225 lbs. (102 kg.)

read and  

save these  

InstructIons

cautIons

Содержание Clodagh Libra

























Отзывы:

Похожие инструкции для Clodagh Libra