13
DIReCTIONS fOR USe
DIR
e
CTIONS
f
OR
US
e
dIrectIons for use
To remove one or both arm rests just take hold of the base of the arm
rest at the metal frame and somewhere on the cushion. Holding securely,
rotate the arm rest while at the same time pulling slightly away from
the table. You will feel the notched connection slide out as you rotate
the arm rest. When you feel this you can then slide the entire arm rest
out of the connection hole very easily. Store it safely on the under-
table shelf until ready for installation.
Re-attach the armrest by sliding the arm rest frame into the hole on the
tabletop and rotating it until you feel the notch slip into place. Push it
in securely and allow the arm rest to rest in the parallel position. This
resets the arm rest in the proper position for the automatic adjustment
feature to be activated.
Do not place excess weight
on the Side Arm Rests. DO
NOT use them in assisting
the client on and off the
table.
either arm rest can be
repositioned to allow a
client to get on and off the
table easily.
When making adjustments
to the arm rests make
certain that the client’s
arms are away from the
working mechanism.
Do not sit on the Arm Rests.
sIde arm rests:
(
cont
.
)
Removing/Re-attaching the Side Arm Rests
manicure surface
installation
manIcure arm rest InstructIons:
cautIon
hand soak bowl
removal
install hand soak bowl
& fill as needed.
First, slide the arm rest pad back to expose manicure bowl.
When the manicure bowl is not in use, slide the top pad forward to
cover the bowl.
