DIReCTIONS fOR USe
16
DIR
e
CTIONS
f
OR
US
e
1. Turn off the foot bath by turning the ON/OFF button to “OFF”.
2. If your pedicure sink is equipped with the optional drain assembly, gently
pull up and slightly twist the drain cover to open. To close the drain, twist the
drain cover again and let it drop down and seat itself against the strainer body.
3. If your pedicure sink does not have a drain, place the discharge pump on the flat
round surface in the bottom of the foot bath.
4. Extend the hose connected to the discharge pump to the area where the water is
to be drained (sink). Use the suction cup provided to secure the hose to the side
of the sink and turn on the discharge pump by plugging the pump’s power cord
into a GFCI wall outlet.
NOTE: This pump must be connected to a GFCI
wall outlet for your protection from electrical shock..
5. When the foot bath appears to be empty, continue running the pump while
removing it from the interior of the foot bath and place it in the sink or chosen
draining area. As soon as the pump and hose are both fully in the sink, unplug the
power cord to turn off the discharge pump. Fresh water can be used to rinse out
the tank during the draining procedure.
NOTE: Do not leave the pump running in the draining area or in a dry foot bath
for more than a few seconds because it may result in damage to the discharge pump.
QuIcklock™ face rest & head rest
how to draIn foot bath
water
discharge
pump
QuIcklock™ face rest & head rest
foot rest
A foot rest is included with this product. It is designed to store under the foot end of the sink as shown.
To use, remove from storage location, insert in end rail slot & rotate to horizontal position.
foot rest
storage
use these
slots for
storage
use these slots when
using foot rest
