19
CAR
e &
CL
e
ANING
how to clean the foot bath
To maintain your pedicure sink and its pipeless jets at maximum level of hygiene,
thoroughly clean the tub shell and jets after each use with a nonabrasive antibacte
-
rial cleaner, rinse thoroughly and dry completely. NEVER use abrasive cleaners on
any part of the appliance.
1. Disassembly & initial cleaning
a. Turn pedicure sink off by rotating the control button. Drain the footbath
according to draining procedure.
b. Remove both jet assemblies. To remove each jet assembly from its casing.
Rotate the jet assembly counterclockwise and pull outward.
c. Remove white impeller cap & impeller.
d. Spray the jet Assembly pieces, footbath interior and jet cases with
*cleaner/disinfectant.
e. Use a clean cloth to clean the jet assembly pieces, removing any visible soil.
f. Scrub all surfaces of the footbath and jet cases.
g. Rinse all surfaces with tap water
2. Disinfection & re-assembly
a. Spray the jet assembly pieces, jet cases and foot bath until thoroughly
wet with *cleaner/disinfectant and allow then to set for one minute.
b. Rinse disinfectant from all surfaces.
c. Dry the jet assembly pieces, jet cases and the footbath with a clean cloth.
d. Reassemble jet assemblies and
reinsert them into jet cases, rotate
them in a clockwise manner to
secure them into position.
* detergent/dIsInfectIon
The use of an EPA registered cleaner/disinfectant with tuberculocidal, germicidal,
pseudomonacidal, Fungicidal and Virucidal eficacy is recommended. Do not use
abrasive cleaners on the Pedicure Basin or Jet Assemblies. *DISPATCH
®
Hospital
Cleaner Disinfectant with Bleach is a suitable cleaner disinfectant for use with the
above procedure.
Dispatch
®
- EPA Reg. No. 56392-7; EST. No. 62801-MI-001.
Kills bacteria and viruses in 1 minute and TB in 30 seconds.
CARe & CLeANING
e. Rotate tabs until they latch, they must be
latched for the pumps to work. There
are two at 180º from each other.
