In order to maintain the quality and ensure the life of the table, here are some preventative
steps that can be taken to protect the upholstery on the chair and accessories.
• Protect your table and accessories with sheets and fleeces. We offer both
fitted sheets and thick fleeces that protect your upholstery fabric against oil
stains while offering comfortable 100% cotton flannel softness to your
clients. You can also preserve your face rest and bolsters with 100%
cotton flannel covers and fleeces.
• Clean your upholstered items only when needed with a mild detergent or
Green Windex. A diluted 1/100 bleach solution for disinfecting can be used.
Dry the table immediately after cleaning to remove excess cleaning solution
Using strong cleaners, such as alcohol, acetone, higher concentrations of
bleach or other products that contain high concentrations of these substances,
can shorten the life of your fabric, or discolor it.
Note: Damage caused by them
will not be covered under the warranty.
• Avoid extremes in heat. Very cold temperatures can make your fabric prone
to cracking. Very high temperatures can cause the fabric to stretch permanently.
• Avoid exposing your products to direct sunlight for extended periods of time.
This can lead to fading and cracking of the fabric.
• Use an anti-slip pad to prevent oil from reaching the upholstery and to keep
your sheets from slipping.
HOW TO CARE FOR YOUR UPHOLSTERY
•
Upholstery
CARE & CLEANING
GENERAL CARE OF EQUIPMENT COMPONENTS
• Use only a mild solution of 4:1 diluted non-alcohol cleaner such
as 409®, Fantastik® or some other non-abrasive cleaner to wipe
down the metal surfaces of the chair. Apply with a damp (not wet)
lint-free cloth. Be sure excess liquid does not drip onto, or into, any of the
electrical controls or mechanisms. Be sure that the unit is unplugged before
cleaning these areas. Wipe these areas carefully with a lint free cloth.
• The electronic powering mechanism of your table requires no general
maintenance
or
lubrication.
• The wooden portions of the equipment can be polished with any
polish approved for wooden surfaces. Spray, or pour, the polish
onto a soft cloth and be careful not to get it onto other surfaces.
• Base & Controls
18
CARE & CLEANING
CARE & CLEANING
