manualshive.com logo in svg

O-Two 01EVE700, Руководство пользователя, Страница: 59 / 60

Поделиться
Скачать
O-Two 01EVE700 Скачать руководство пользователя страница 59

59

e700 User Manual

Liability for proper function or damage 

The liability for the proper function of the apparatus is irrevocably 

transferred to the owner or operator to the extent that the apparatus 

is serviced or repaired by personnel not employed or authorized 

by O-Two Medical Technologies Inc. or if the apparatus is used in a 

manner not conforming to its intended use.

O-Two Medical Technologies Inc. cannot be held responsible for 

damage caused by non-compliance with the recommendations given 

above. 

The warranty and liability provisions of the terms of sale and delivery 

of O-Two Medical Technologies Inc. are likewise not modifi ed by the 

recommendations given above.

Note: 

O-Two Warrants the battery for a period of one year from the 

date of purchase.

   

WARNING

   

It is recommended that the routine preventive maintenance shall 

be carried out at least every 6 months from date of purchase. 

Repair and general overhaul of the ventilator must be carried out 

by trained service personnel. Evaluation of performance against 

manufacturer’s specifi cations may be undertaken by suitably 

qualifi ed personnel to determine if the ventilator is functioning 

within specifi cation. Any ventilators deemed to be out of 

specifi cation must be returned to O-Two Medical Technologies Inc. 

(or one of it’s approved Service Centers) for service and/or repair.

We recommend that a service contract be obtained with O-Two 

Medical Technologies Inc. (or one of it’s approved Service Centers) 

and that all repairs also be carried out by them. 

Only authentic O-Two Medical Technologies Inc. spare parts must 

be used for maintenance.

Содержание 01EVE700





























































Отзывы:

Нет отзывов